Warning Label Expert Witness – Read Even Further To Help With Making An Informed Course Of Action..

When choosing the correct label material for the application it is better to leave that decision to a professional. There are plenty of variables that figure out what material will work and at what cost you will have to pay. Lets have a look at exactly what the expert has to know before making a decision for your application.

1. How many and what size label do you really need? This is very important because you don’t want to get right into a situation where you would have to buy 3 million square inches of paper for a job that could only take 5 thousand square inches.

2. Will you be printing anything on the label after receipt? This is important because certain materials, inks, and adhesives are not suitable for all kinds of printing.

3. What printer make and model will you be using to print your labels, and do you need rolls, fanfold or sheet labels? This is important because certain materials, inks, and adhesives will have to be chosen for your specific application.

4. What direction does the print have to enter in the printer? This will be significant when a specific program can be used the labels might be on the roll eight different copy positions.

5. What is going to the label be employed to for final use? The outer lining is essential because certain adhesives is not going to work with all surfaces, as well as the model of the surface is very important because some adhesives need a longer period to adhere and may lift from a curved surface quickly.

6. What temperature will the label be applied and put through throughout the lifetime of the label? The Warnings Expert must know this info because adhesives and face sheets have temperature ranges that they may function in without falling or melting.

7. Will the label be applied indoors or outdoors? This makes a massive difference because certain materials and inks will deteriorate quickly when exposed to outdoor extremes.

8. Are there any regulations the label must meet like UL, CSA, CUL, ANSI, FDA, Etc? This is very important because of both safety and compliance reasons. It might not make a difference towards the purchaser trying to find a price but it sure becomes important during an audit.

9. Does the label must have variable information printed? Only certain types of face stocks are approved for inline imaging and will be important.

10. Will the liner need perf between labels? This could be employed for estimating purposes as well as determines a liner that is certainly suitable for perforations.

11. How many colors must be printed and they are they four color process? This info is utilized to find out press capabilities, along with the face sheet of the product. Certain face stocks is not going to print well using a high line screen needed for four color process.

Allow me to give you a good example of how all these questions visit play in the making decisions process, and allows the end user to get the correct product right out from the gate.

Let’s say you will need 275,000 6″ x 12″ warning labels on rolls that might be processed through a Zebra thermal transfer printer using a model number of 170XI III with the top of the the type going to the printer first. The fmrecm will likely be printed in three colors and applied at room temperature and will also be use outdoors on flat metal painted power panels for 3 years. The labels is going to be perforated between every label to facilitate easy removal.

The 275,000 feet of material allows the expert to choose a material that could meet most minimum orders which reveals a huge number of possibilities. Using the labels running through the Zebra 170XI III printer this lets the expert realize that the roll will need to be wound in copy position primary over a three inch core. The expert will even know that the inks used should be receptive to thermal transfer imaging, and also has to be ultra lightfast to resist outdoor elements. With the label being applied to a power panel outdoors and being printed thermal transfer this limits the expert to employing a polyester material plus an acrylic permanent adhesive using a 40 pound liner.

With just a few items of wrong information you could have developed a really cheap alternative which could have faded in a number of months and completely disappeared within a year. It pays to get the expert choose your label materials!